DIY Micellar water is really a water-based cleaning agent aka cleanser that you often use delicately to wash your skin sans rinsing it off. It resembles water in appearance, yet it offers mild cleansing and moisturizing properties. Micellar water may be utilized as an all-in-one cleaner, which is ideal for individuals who are always on the move or have delicate skin.
While we often recommend DIY micellar water for all skin types, it may be too gentle for people with excessively oily skin or who frequently apply oil-based or impermeable makeup. Micellar water consists of micelles that are present in the cleanser’s watery components.
It all appears very complex, hence why micellar cleansers are so expensive, but it’s actually fairly basic and doesn’t differentiate micellar waters from those other cleansers.
Diy Micellar Water Recipe
Micellar water is cheap and easy to prepare at home! You can make micellar water for face using the ingredients below. Here’s a composition that you may tweak to suit your needs and skin type.
The ingredients for micellar water are;
- 8 oz. pure warm water (distilled or reverse osmosis)
- 1/8 teaspoon liquid or powdered lecithin (find lecithin granules here or liquid lecithin here)
- 12 teaspoon vegetable glycerin liquid (find it here)
- 12 tsp. oil (argan, jojoba, sweet almond, grapeseed, safflower, etc) (find these carrier oils here)
- 12 tbsp liquid soap (learn to make your own here)
- a few drops of essential oil, such as rose, lavender, or tea tree, as an alternative (find pure essential oils here)
- strainer with a fine mesh
- glass container with a tight-fitting top that has been sterilized (we recommend a dark-colored bottle to protect fragile oils)
- A mixing bowl made of glass
To begin, fill the glass bowl halfway with warm water. Fill the bowl with the remaining ingredients. Mix thoroughly. Remove any particles from the lecithin with a strainer. Finally, transfer to a glass container and securely close the lid.
How to use Micellar Water
Using a cotton pad, apply sufficient DIY micellar water then squeeze away the surplus. Resist rubbing as you massage all over your skin. Remove once a few seconds have passed. You might need to massage a little if you wear impermeable makeup or stained lipstick, however, try to prevent it. Touching the skin might aggravate it.
This DIY version is far less expensive than store-bought and has no additives. It has a shelf life of roughly a month, based on how quickly you consume it. You may experiment with various oils and fundamental oils to create different combinations.
How to Make Micellar Water at Home
#1. Micellar Water With WitchHazel, Rosewater, and Cucumber Water
You may probably attain various effects by using different fluids. I use witch hazel instead of water since I have huge pores and greasy skin. It does not affect the storage time. Neither of them makes use of rose water. When you don’t possess rose water and wish to employ it for prone skin, create a rose petal tea and apply it instead.
Note: If you’re using a botanical ingredient like rose petals, you’ll require to use preservatives or keep it in the fridge. It’s even possible to freeze it! I freeze mine in ice cube trays and keep it that way for storage. Take a cube out of the freezer and warm it. This will go on for a few days.
You can prepare the cucumber water in this manner. You should liquify and strain cucumbers until just the juice remains. Replace the water with this and proceed as directed for the rose petals.
DIY Micellar Water with Birch Sap and Other Alternatives
Birch sap is present in a more costly kind of micellar water. One can widely recognize the therapeutic properties of birch. If you’re lucky enough to get black or sweet birch tips in your neighborhood, you may brew a decoction with them.
Because birch has the same component as wintergreen – methyl salicylate — the precursor of aspirin – the tips will smell like it. It has a high healing capacity and can aid in the reduction of aggravation and pimples.
Diy Micellar Water with Rose Water
- distilled water (61 g)
- rose water (15 g)
- aloe vera juice (15 g)
- cucumber extract (2 g)
- glycerin (3 g)
- Decyl glucoside, 3 g
- 1 g geogrid (also known as Cosgard) or other antimicrobials
- lactic acid to reduce the pH as needed
- Balance out the water, rose water, aloe extract, glycerol, and cucumber juice, and mix well.
- Slowly mix in the Decyl Glucoside until everything completely absorbs with the other components. Too much forceful mixing will result in a lot of froth.
- Mix in the preservatives of your choice with the other components.
- Pour the micellar water into the dispensing bottle of your choice once any created froth has settled. Bottle with flip-top tops make pouring and utilizing it easier.
Benefits of DIY Micellar Water:
If you are still unsure whether you should make micellar water, here are some amazing benefits for using it;
- It easily removes makeup, grime, and grease.
- Limits the production of oil by bringing the pH of the skin back into balance.
- Helps in the reduction of clogged pores and blackheads by shrinking pores.
- Precludes pimple development and manages breakouts on a regular basis.
- It softens and moisturizes the skin.
- Reduces Irritation and inflammation.
- Draws out toxins and pollutants of the skin, which tones it.
- Hydrates and refreshes the skin.
- You can use it to clean makeup brushes.
Simple DIY Micellar Water Ingredients
You can make micellar water for hair, and face. Make sure you include the following ingredients;
- Decyl Glucoside
Your DIY micellar water‘s surfactant and active cleaning agent is this.
Rosewater is affordable, simple to come by, and has a pleasant aroma. It may also have anti-inflammatory qualities. It is gentle for vulnerable skin so may assist with sunburn, acne, allergy, and other skin conditions.
- Aloe vera juice
Aloe also has anti-inflammatory and therapeutic properties. It may aid in the formation of fresh cells. It aids in the treatment of acne, sun damage, and other skin disorders.
Glycerin is a humectant, which means it draws hydration from the air and transports it to your face to nourish it. Control the quantity of glycerin in your recipe to no more than 5% of the total. Applying more than that may cause your skin to get sticky.
- Extract of Cucumber
Cucumber extract is moisturizing and relaxing, with astringent characteristics that can help decrease puffiness around the eyes. Cucumber extracts are often glycerine-based, so you may substitute another glycerin-based extraction or simply use glycerin if you wouldn’t want to use additional extraction. You can even cucumber for making facial masks. Here are 4 best diy cucumber face mask for pigmentation.
This is among the few wide-ranging antioxidants approved for use in ECOCERT cosmetics.
- Distilled Water
While you may boil your water first and then use it, I suggest using distilled water to avoid any undesirable microorganisms or other uncertainty that may be present in tap water.
- Lactic acid
If you’re using new components, water, or whatever else that can change the pH, you can use a few droplets of lactic acid to adjust the pH as required.
How to use Homemade Micellar Water for Face
Apply the micellar water on a cotton pad or cotton napkin and softly wipe it around your face. Repeat using a new cotton pad or a clean section of the cloth until no more dirt or cosmetics is visible on the cloth.
Although it isn’t required to cleanse your face following applying micellar water, you could if it seems tight on the skin or you don’t enjoy the texture it left.
Is micellar water a toner?
DIY Micellar water is an all-over toner that efficiently cleanses and tones the skin. It also serves as a makeup remover, face cleanser, toner, and moisturizer in one container.
What can I use instead of micellar water?
Baby oil is effective, but natural oils are preferable since they contain a greater number of healthy fatty acids.